| Customization: | Available |
|---|---|
| After-sales Service: | One-Stop Service |
| Warranty: | Lifelong |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| The loading car is used for make the steel coil from loading position to uncoiler, at the same time lift oil cylinder, so that the steel coil inner hole is accurately set on the mandrel of the uncoiler, the uncoiler tension, push back to the original position |
 |
| Aims to feed the pipe machine. They are manufactured as double chuck(double cone) or single chuck(single cone). Double-cone have automatic rotation adjustment. Assembly of the roll, adjustment of the brakes, and overpressure are hand controlled. while single chuck is working, the chunk/cone on the other side and stock strips. |
|
| Straight head: the unit is used for lead steel strip into leveler smoothly. there are pressure arm, shovel head composition. Gantry type, up and down uncoil. Pinching&leveling machine is used for leveling the steel strip head and end, make it easy for shearing and welding |
|
| this Unit use for shear and welding the steel strip head and ends, ensure the tube mill machine continuous production. TIG welding for ≤3mm thickness Co2 welding for large thickness |
|
| This group is needed for the long-term, uninterrupted operation of the pipe mill line. it consists of horizontal(driven) and vertical(non-driven) rollers. the microprocessor is controlled by the axis control system. manual installation is performed. its speed can change depending on the pipe mill line speed. |
|
| I Forming Group II Forming Group I Sizing Group II Sizing Group |
|
| The sheet-pipe is induced by going through the working coil of the high frequency welder and is heated until melted. Afterwards, welding reels are pressurized and boil the sheet at the desired diameter. it has Yf cabin, DC cabin, and heat exchange units. |
|
| The boiled and scrap-free tube is cooled before being calibrated. This group consists of reels fixed inside a closed pool and has the pump and filter system to provide the cooling liquid. it also has a cooling tower to cool the cooling water that has warmed.(water with resistant to corrosion ingredient.) |
|
| This group performs straightening in pipe manufacturing. In profile manufacturing, it shapes the pipe which is prepared in the caliber with molds(rollers) and brings it to the desired size. It can be made in 2,3, 4 or 5. |
|
| The Tube and profile at the final size are cut into the desired size in this group. Cold cut saw are critical parts of the tubelines. high-performance cold saws are designed specifically to meet the specific needs of customers. You can use cold cut saw for scrap-free surface that can never be produced with hot cut saws |
|
| After cutting,the finish pipe running on the transit table,then use the automatic unit make it into stack desk |
|
| it is used to take the product that is cut with the saw out of the pipe production line. Full-Automatic or Manual stacking and bundling. |
|
){kind=link}